Custom cables engineered around your exact limits.
Bespoke high-temperature and extreme-environment cable engineering from AWG 44 to 400 mm² and –65°C to +1000°C+. Configure conductors, fluoropolymers, shielding, and max O.D. online.
Custom Cable Capability Matrix
| Dimension | Engineering Range | Notes |
|---|---|---|
| AWG 44 to 750 kcmil · 0.002 mm² to 400 mm² | Solid, concentric stranded, rope-lay, ultra-fine robotics flex stranding, and flat ribbon geometry | |
| Bare Copper, Tinned Copper, Silver-Plated (SPC), Nickel-Plated (2% & 27%), Pure Nickel, Special Alloys | Thermocouple alloys (KX/JX/EX), copper-nickel, stainless steel reinforcement, and hybrid power/signal cores | |
| PTFE, FEP, PFA, ETFE, PEEK, Silicone Rubber (SiR), XLPE / XLPO, PVC, Mica / Fiberglass Wrap | Precision thin-wall fluoropolymer extrusion, multi-layer tape wrapping, and sintered high-dielectric builds | |
| –65°C to +1000°C+ Extreme-Temperature Envelope | Cryogenic fluoropolymer flexibility through 250°C TGGT, 450°C–550°C MGT, pure nickel, and 1000°C+ quartz/ceramic fiber constructions | |
| Low-Voltage Signal up to 35kV+ Operating / 100kV Dielectric Test · 50Ω / 75Ω / 100Ω / 120Ω Controlled Z₀ | High-voltage corona-resistant silicone/fluoropolymer builds and impedance-matched CAN / coaxial / differential pairs | |
| Al-Mylar Foil, Tinned / Silver / Nickel Copper Braid (≥85%–95%), Spiral Serve, SS304 / Aramid / Fiberglass Braid | Dual foil + braid EMI protection, low-noise triboelectric layers, abrasion-resistant overbraids, and rodent/crush armor | |
| Single Hook-Up Wire to 64+ Core Cables, Twisted Pairs/Triads, Coax + Power + Signal Composite Bundles | Custom pitch control, low-skew pairing, PTFE/silicone fillers, custom color stripes, number printing, and laser-markable jackets |
Custom Cable Architecture Guidance
- Conductor & Stranding: Match conductor metallurgy to continuous operating temperature—from tinned and silver-plated copper up to 27% nickel-coated and pure nickel—and pair with stranding geometry tailored for static routing or high-flex torsion.
- Primary Insulation & Dielectric: Select dielectric chemistry around chemical exposure, wall thickness limits, and voltage stress—spanning thin-wall fluoropolymers, ultra-flexible silicone rubber, cross-linked polyolefins, and high-heat mica-fiberglass wraps.
- Core Configuration & Identification: Combine twisted signal pairs, controlled-impedance data lines, and power conductors into a balanced round cross-section with NEMA, DIN 47100, helical stripe, or sequential number identification.
- EMI Shielding & Binder Wraps: Balance high-frequency foil attenuation against low-frequency copper braid strength and flex fatigue, adding low-friction PTFE or polyimide binder tapes so cores slip cleanly during tight-radius bending.
- Outer Jacket, Overbraid & Marking: Seal and armor the finished assembly against cutting fluids, UV, vacuum outgassing, or thermal shock using extruded fluoropolymers, industrial elastomers, fiberglass, aramid, or stainless steel overbraids.
Frequently Asked Questions
- What minimum order quantity (MOQ) applies to custom-engineered cables?
- There is no MOQ for custom samples and engineering qualification builds. Production run quantities depend on conductor stranding, fluoropolymer extrusion setup, and braiding complexity—share your target specification and our team will provide an exact sample and production quote.
- How fast can CASMO turn around a custom cable design and sample?
- Engineering construction proposals and cross-sectional drawings are typically delivered within 24–48 business hours. Custom prototype reels generally ship in 2 to 4 weeks depending on specialty conductor alloys or custom tooling.
- Can you combine power conductors, twisted signal pairs, and coax inside one jacket?
- Yes. Composite and hybrid multi-core builds—such as 120Ω CAN bus or shielded sensor pairs bundled with AWG 12–16 power conductors, drain wires, and low-friction PTFE wraps—are one of our core engineering specialties.
- Can custom cables carry UL AWM recognition or custom OEM jacket legends?
- Where the custom construction falls within our certified UL 758 AWM Style envelopes, reels can be supplied with full UL/cUL recognition, RoHS 3 / REACH compliance, and custom ink-jet or laser jacket legends.