Nuclear Cables
Radiation-tolerant PEEK, polyimide and high-temperature specialty wires and cables engineered for nuclear instrumentation, sensors, reactor auxiliaries and balance-of-plant systems.
Radiation-tolerant polymer insulation for nuclear environments
Cables serving nuclear power generation, hot cells, radiation-monitoring loops, particle accelerators and high-energy test facilities face a combined stress profile that quickly embrittles standard industrial wiring: continuous gamma and neutron radiation, elevated ambient heat, superheated steam, chemical washdowns and strict halogen-free fire safety requirements. Conventional PVC and general-purpose elastomers cross-link excessively or release corrosive acid gases under ionising radiation, leading to insulation cracking and premature circuit failure.
Selecting the right polymer system is therefore critical to service life. Polyether ether ketone (PEEK) — as used in CASMO's CASPEEK 260 construction rated to +260°C continuous — combines exceptional gamma-radiation tolerance, steam and hydrolysis resistance, high tensile and cut-through strength, and inherent zero-halogen, low-smoke UL 94 V-0 flame performance without chemical cross-linking or halogenated additives. Where application envelopes call for ultra-thin film dielectrics or specific chemical and thermal trade-offs, CASMO also engineers constructions using aromatic Polyimide film and fluoropolymers such as ETFE, PTFE and FEP, paired with tinned, silver-plated or nickel-plated copper conductors and high-coverage metallic EMI shielding.
Nuclear qualification is always project- and zone-specific. CASMO manufactures radiation-resistant wire and multicore instrumentation, control and thermocouple cables for balance-of-plant, monitoring, sensor and custom-engineered builds designed to support customer qualification programmes against IEEE 323, IEEE 383 and applicable IEC nuclear cable test protocols — providing full material traceability, dimensional control and custom construction tailoring for demanding installations.
Nuclear Cable Products
- CASPEEK 260 — ASTM B355 / ASTM B298 / IEC 60754-2 / UL 94 V-0 · PEEK · -65°C to +260°C · 300V
Related Standards, Materials & Applications
Frequently Asked Questions
- Why is PEEK insulation preferred over standard fluoropolymers in high-radiation zones?
- While PTFE and FEP excel in extreme chemical and thermal environments, PTFE degrades at relatively low cumulative radiation doses. Aromatic PEEK (such as CASPEEK 260, rated to +260°C continuous) retains mechanical toughness, dielectric strength and dimensional stability across far higher gamma-radiation doses, while remaining inherently halogen-free, low-smoke and UL 94 V-0 flame retardant.
- How do PEEK, Polyimide and ETFE compare for radiation-tolerant cable builds?
- PEEK offers an outstanding balance of melt-extrudable wall uniformity, +260°C continuous temperature rating, hydrolysis/steam endurance, zero-halogen UL 94 V-0 behaviour and high radiation resistance. Polyimide film provides ultra-thin-wall dielectric strength and broad radiation and cryogenic-to-+260°C stability, while ETFE offers thin-wall mechanical toughness and substantially better radiation tolerance than PTFE at up to +150°C.
- Are CASMO nuclear-category cables pre-certified as Class 1E safety-related equipment?
- No — Class 1E environmental and LOCA qualification is tied to specific facility specifications, test sequences and project-level qualification documentation. CASMO supplies standard radiation-resistant constructions such as CASPEEK 260 and custom-engineered cables built to customer material, thermal, flame and lot-traceability specifications to support project qualification under IEEE 323, IEEE 383 or applicable IEC standards.
- What fire, smoke and halogen performance is required for nuclear plant wiring?
- Nuclear power and containment-adjacent facilities typically require halogen-free, low-smoke compounds to prevent corrosive acid-gas damage to sensitive instrumentation and maintain visibility during a fire event. PEEK and halogen-free constructions deliver UL 94 V-0 self-extinguishing behaviour alongside low smoke density and zero halogen content.
- Can CASMO manufacture custom shielded multicore or sensor cables for nuclear instrumentation?
- Yes — beyond single-core PEEK hook-up wire, CASMO custom-engineers twisted-pair, multicore instrumentation, RTD and thermocouple cables with PEEK, polyimide or fluoropolymer insulations, silver- or nickel-plated conductors, foil/braid EMI shielding and outer mechanical overbraids matched to your drawing and qualification test plan.
Engineering Guides
- PFAS-Free High-Temperature Wire & Cable Alternatives: Navigating ECHA's November 2026 Opinions, EPA TSCA 8(a)(7), and Fluoropolymer Substitution — Following ECHA's November 2026 final PFAS opinions and US EPA TSCA 8(a)(7) updates, learn how to audit PTFE, FEP, PFA, and ETFE wire BOMs and evaluate PFAS-free PEEK, Silicone, Polyimide, XLPO, and Mica alternatives.