CAN-Bus Cables

Impedance-controlled twisted-pair communication cables for commercial vehicles, heavy trucks and mobile machinery — built to SAE J1939 physical-layer specifications across shielded and unshielded constructions.

Differential twisted-pair design for vehicle networks

Controller Area Network (CAN) buses in heavy-duty trucks, agricultural vehicles, construction equipment and off-highway machinery carry high-speed differential telemetry across electrically noisy chassis and engine-bay zones. Ordinary hook-up wire lacks controlled characteristic impedance and balanced pair geometry, causing signal reflections, electromagnetic susceptibility and frame errors over trunk and drop runs.

Vehicle CAN-Bus cables are engineered around a nominal 120 Ω impedance with tightly controlled pair twist, low mutual capacitance and automotive-grade insulation and jacketing resistant to engine heat (commonly 125°C to 150°C), vibration, fuels and lubricants. Selection follows the governing SAE J1939 physical-layer document — such as shielded twisted-pair constructions with drain wire (SAE J1939/11) for high-EMI routing or unshielded twisted-pair constructions (SAE J1939/15) for streamlined harness integration.

CASMO manufactures shielded and unshielded CAN-Bus cables matched to SAE J1939 physical-layer requirements, documenting conductor stranding, insulation system, shield design and tested electrical values clearly on each specification sheet.

CAN-Bus Cable Products

  • SAE J1939/15-150 — SAE J1939/15 · Foam FEP · -40°C to +150°C · 300V
  • SAE J1939/15 — SAE J1939/15 · Foam XLPE · -40°C to +125°C · 60V
  • SAE J1939/11-150 — SAE J1939/11 · Foam FEP · -40°C to +150°C · 300V
  • SAE J1939/11 — SAE J1939/11 · Foam XLPE · -40°C to +125°C · 300V

Related Standards, Materials & Applications

Frequently Asked Questions

What is the difference between SAE J1939/11 and SAE J1939/15 cables?
SAE J1939/11 specifies a shielded twisted pair with a drain wire for enhanced EMI protection in electrically noisy vehicle routing, while SAE J1939/15 specifies an unshielded twisted pair for lighter, simplified network harnesses where shielding is not required.
Why does CAN-Bus cable require 120 Ω characteristic impedance?
CAN transceivers and bus termination resistors are matched to a nominal 120 Ω differential impedance. Maintaining controlled impedance along the twisted pair minimizes signal reflections and preserves clean bit timing across trunk lengths and baud rates.
What temperature and fluid resistance do vehicle CAN-Bus cables offer?
Automotive CAN-Bus cables use cross-linked or specialty automotive polymer systems rated for elevated chassis and engine-bay temperatures (typically 125°C or 150°C) while resisting oils, fuels, coolants and mechanical abrasion.
Does specifying SAE J1939 alone define every cable parameter?
No — SAE J1939 is a standards family with distinct physical-layer parts. Always confirm the exact physical-layer document (such as J1939/11 or J1939/15), conductor size, shielding, temperature class and tested electrical characteristics on the product specification sheet.

Engineering Guides