SAE J1939/11-150

SAE J1939/11-150 is a CASMO can-bus cable for CAN-Bus. Foam FEP insulated, -40°C to +150°C, 300V. High-temperature 120 Ω shielded twisted-pair CAN-Bus cable per SAE J1939/11 with Foam FEP insulation, aluminum/Mylar screen, tinned copper drain wire and TPV jacket (-40°C to +150°C, 300V).

High-temperature 120 Ω shielded twisted-pair CAN-Bus cable per SAE J1939/11 with Foam FEP insulation, aluminum/Mylar screen, tinned copper drain wire and TPV jacket (-40°C to +150°C, 300V).

Key Ratings

  • SAE J1939/11-150: · Temperature -40°C to +150°C · Rated Voltage 300V · Test Voltage 2000V / 1 min

Construction

Conductor
Bare Copper or Tinned Copper · Stranded
Core Insulation
Foamed · Foam FEP
Cabling
Twisted · Twisted pair (50 mm nominal lay length)
Core Identification
Yellow (CAN_H), Green (CAN_L)
Filler
PE Filler Strip
Shield
Foil · Aluminum/Mylar foil
Drain Wire
Stranded tinned copper drain wire
Jacket
Extruded · TPV

Characteristics

  • Characteristic Impedance: 120 Ω ± 12 Ω (at 1 MHz)
  • Nominal Capacitance: 75 pF/m (conductor-to-conductor) · 110 pF/m (conductor-to-shield)
  • High-Temperature Engine-Bay Endurance: Foamed fluoropolymer core insulation and rugged TPV jacket withstand high-heat routing near turbochargers and exhaust aftertreatment modules.
  • EMC Foil & Drain Screening: Overall aluminum/Mylar tape screen with stranded tinned copper drain wire shields differential CAN signals against powertrain and alternator EMI.
  • Controlled Pair Twist Balance: Precision-twisted Yellow/Green differential pair maintains signal balance and common-mode noise rejection along vehicle backbones.

Applications

  • Vehicle CAN-Bus Networks: For communication links between electronic control units in commercial vehicles and mobile equipment, using the cable construction specified for the applicable CAN network.
  • Mobile Equipment Communication: For data connections in construction machinery, agricultural equipment and other mobile systems where cable routing and environmental requirements must match the installation.
  • Shielded Signal Interconnections: For signal connections requiring a specified cable screens and a defined grounding arrangement between equipment modules.

Standards & Compliance

  • Standard: SAE J1939/11
  • RoHS: Compliant
  • REACH: Compliant

SAE J1939/11-150

CASMO Part No.Conductor Size (AWG)No. Of StrandsNom. Strand Dia. (mm)Nom. Ins. Thickness (mm)Nom. Core O.D. (mm)Nom. Jkt. Thickness (mm)Nom. O.D. (mm)O.D. Tolerance ± (mm)Max. DCR @20°C (Ω/km)
16100120/19-AS-BK20190.200.602.400.807.60.337.1
16100120/19-TS-BK20190.200.602.400.807.60.338.2
16100118/19-AS-BK18190.230.702.800.808.90.422.3
16100118/19-TS-BK18190.230.702.800.808.90.423.2

* Conductor code: "-AS-" = bare copper conductor; "-TS-" = tinned copper conductor. † Jacket colour code: "-BK" = Black (standard). Other jacket colours available on request. ‡ Conductor cross-section reference: 20 AWG (19 × 0.20 mm, 0.5 mm² nominal class); 18 AWG (19 × 0.23 mm, 0.8 mm² nominal class).

  • Conductor code: "-AS-" = bare copper conductor; "-TS-" = tinned copper conductor.
  • Jacket colour code: "-BK" = Black (standard). Other jacket colours available on request.
  • Conductor cross-section reference: 20 AWG (19 × 0.20 mm, 0.5 mm² nominal class); 18 AWG (19 × 0.23 mm, 0.8 mm² nominal class).

Related Categories