Automotive Low-Voltage Cables

Regional and international primary wires for in-vehicle harnesses — spanning JASO, SAE and ISO/DIN thin-wall, ultra-thin-wall and cross-linked constructions for reliable automotive electrical systems.

Automotive primary wire standards & wall-thickness classes

Automotive low-voltage wiring operates in one of the most demanding mass-production environments: continuous vibration, under-hood heat, exposure to fuels and lubricants, and multi-decade service expectations. Regional and international specifications — JASO D611 in Japan, SAE J1128 / J1127 in North America, and ISO 19642 / DIN 72551 in Europe — define strict conductor geometries, insulation wall classes, fluid immunity and abrasion performance matched to modern sealed connector systems.

Wall thickness and insulation chemistry are the primary engineering levers. Thin-wall and ultra-thin-wall constructions (such as AVS, AVSS, FLRY, TXL and PP-insulated FLR9Y) cut insulation mass and bundle diameter across dense harnesses, while cross-linked polyethylene (XLPE), thermoplastic elastomer (TPE), silicone and fluoropolymer grades raise continuous thermal endurance from 80°C–105°C up to 125°C, 150°C and 200°C+ for engine-bay and exhaust-adjacent zones.

CASMO manufactures broad single-core, multicore and battery-feeder portfolios across JASO, SAE and ISO/DIN programmes — allowing harness makers and Tier-1 suppliers to consolidate global platform sourcing under consistent dimensional control and RoHS/REACH compliance.

Automotive LV Products

  • TXL — SAE J1128 · Cross-Linked Polyolefin · 125°C · 25/60V
  • TWP — SAE J1128 · PVC · 80°C · 25/60V
  • SXL — SAE J1128 · Cross-Linked Polyolefin · 125°C · 25/60V
  • STX — SAE J1127 · Cross-Linked Polyolefin · 125°C · 25/60V
  • STT — SAE J1127 · PVC · 80°C · 25/60V
  • STR — SAE J1127 · Synthetic Rubber · 80°C · 25/60V
  • SGX — SAE J1127 · Cross-Linked Polyolefin · 125°C · 25/60V
  • SGT — SAE J1127 · PVC · 80°C · 25/60V
  • SGR — SAE J1127 · Synthetic Rubber · 80°C · 25/60V
  • SAE J1939/15-150 — SAE J1939/15 · Foam FEP · -40°C to +150°C · 300V
  • SAE J1939/15 — SAE J1939/15 · Foam XLPE · -40°C to +125°C · 60V
  • SAE J1939/11-150 — SAE J1939/11 · Foam FEP · -40°C to +150°C · 300V
  • SAE J1939/11 — SAE J1939/11 · Foam XLPE · -40°C to +125°C · 300V
  • HTS — SAE J1128 · Synthetic Rubber · 80°C · 25/60V
  • HDT — SAE J1128 · PVC · 80°C · 25/60V
  • HDEB — JASO D611 · PVC · 80°C · 25/60V
  • GXL — SAE J1128 · Cross-Linked Polyolefin · 125°C · 25/60V
  • GPT — SAE J1128 · PVC · 80°C · 25/60V
  • FLYW125 — ISO 19642-3 · Heat-Resistant PVC · 125°C · 25/60V
  • FLYKW — ISO 19642-3 · PVC · 105°C · 25/60V
  • FLY — ISO 19642-3 · PVC · 85°C · 25/60V
  • FLUY — ISO 19642-3 · PVC · 105°C · 25/60V
  • FLU6Y — ISO 19642-3 · FEP · 200°C · 25/60V
  • FLRYW125 — ISO 19642-3 · Heat-Resistant PVC · 125°C · 25/60V
  • FLRY — ISO 19642-3 · PVC · 105°C · 25/60V
  • FLRX — ISO 19642-3 · XLPVC · 105°C · 25/60V
  • FLR91X — ISO 19642-3 · XLPO · 125°C · 25/60V
  • FLR51Y — ISO 19642-3 · PFA · -40°C to +260°C · 25/60V
  • FLR31Y — ISO 19642-3 · TPE-S · 125°C · 25/60V
  • FLR13Y — ISO 19642-3 · TPE-E (Hydrolysis-Resistant) · 150°C · 25/60V
  • FLR12Y — ISO 19642-3 · TPE-E · 150°C · 25/60V
  • FLR9Y — ISO 19642-3 · PP · 125°C · 25/60V
  • FLR7Y — ISO 19642-3 · ETFE · -40°C to +180°C · 25/60V
  • FLR6Y — ISO 19642-3 · FEP · -40°C to +200°C · 25/60V
  • FLR5Y — ISO 19642-3 · PTFE · -40°C to +260°C · 25/60V
  • FLR4Y — ISO 19642-3 · PA (Polyamide) · 100°C · 25/60V
  • FLR2X150 — ISO 19642-3 · XLPE · 150°C · 25/60V
  • FLR2X — ISO 19642-3 · XLPE · 125°C · 25/60V
  • FLR2G — ISO 19642-3 · Silicone Rubber (SiR) · -40°C to +200°C · 25/60V
  • FL9Y — ISO 19642-3 · PP · 125°C · 25/60V
  • FL2G — ISO 19642-3 · Silicone Rubber (SiR) · -40°C to +200°C · 25/60V
  • EB — JASO D611 · PVC · 80°C · 25/60V
  • CIVUS — ISO 19642-3 · PVC · 105°C · 25/60V
  • CAVS — JASO D611 · PVC · 80°C · 25/60V
  • AVUHSF — Hyundai & KIA ES91110-05 · PVC · 135°C · 25/60V
  • AVSSH — JASO D611 · PVC · 100°C · 25/60V
  • AVSS — JASO D611 · PVC · 80°C · 25/60V
  • AVS — JASO D611 · PVC · 80°C · 25/60V
  • AV — JASO D611 · PVC · 80°C · 25/60V
  • AEX — JASO D611 · XLPE · 120°C · 25/60V
  • AESSX — JASO D611 · XLPE · 120°C · 25/60V

Related Standards, Materials & Applications

Frequently Asked Questions

What is the difference between AVS and AVSS automotive wire?
Both are JASO D611 PVC primary wires; AVSS uses an ultra-thin insulation wall compared with thin-wall AVS, reducing harness weight and bundle diameter for the same conductor cross-section.
Can I directly substitute SAE GXL for JASO AVSS or ISO FLRY?
Not without engineering review — JASO, SAE and ISO/DIN standards specify different conductor sizing systems (mm² vs. AWG), outer diameters, wall classes and temperature ratings that affect terminal crimps and connector seals.
What temperature classes are available for automotive primary wires?
Standard PVC wires typically cover 80°C to 105°C; polypropylene, TPE and cross-linked XLPE grades (such as GXL, TXL, AEX, FLR2X and FLR13Y) cover 125°C to 150°C; silicone and fluoropolymer grades extend to 180°C–250°C.
Are CASMO automotive primary wires RoHS and REACH compliant?
Yes — CASMO automotive wires are manufactured with lead-free compounds meeting RoHS and REACH requirements for global OEM supply chains.