Silicone — Silicone Rubber Insulation
Supple thermoset elastomer rated for continuous 150°C to 200°C service — retaining deep-cold and high-heat flexibility across EV high-voltage, appliance, motor-lead and high-flex UL AWM cables.
What is Silicone insulation?
Silicone rubber (SiR) is a cross-linked thermoset elastomer valued for maintaining flexibility across an extraordinary temperature span — from deep sub-zero cold (−60°C) up to 150°C–200°C continuous — while resisting thermal ageing, ozone, corona and weathering. Where conventional polymers stiffen or crack under heat cycling, silicone stays supple for repeated flexing in hot enclosures.
That performance makes silicone rubber a leading insulation for EV high-voltage cables, high-flex UL AWM appliance and motor leads, lighting and heating equipment wiring, and high-temperature thermocouple cables. Where additional cut-through or abrasion protection is needed, silicone cores are frequently reinforced with an outer fiberglass braid.
Under severe fire exposure, silicone converts into a non-conductive silica ash, supporting heat-resistant and circuit-integrity cable designs.
Key Material Properties
| Property | Rating | Notes |
|---|---|---|
| Max temperature | 150°C–200°C continuous | Supple down to −60°C |
| Type | Thermoset elastomer | Stays flexible under heat cycling |
| Ageing | Excellent heat & ozone resistance | Resists corona and weathering |
| Typical uses | EV HV, motor leads, high-flex AWM, sensors | Hot and flexing routing |
Silicone Insulated Products
- UL 3530 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3529 — UL 758 AWM · Silicone rubber · -60°C to +150°C · 600V
- UL 3513 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3512 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3367 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 300V
- UL 3172 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3135 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3133 — UL 758 AWM · Silicone rubber · -60°C to +150°C · 600V
- UL 3132 — UL 758 AWM · Silicone rubber · -60°C to +150°C · 300V
- UL 3122 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 300V
- UL 3075 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3074 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3071 — UL 758 AWM · Silicone rubber · -60°C to +200°C · 600V
- UL 3069 — UL 758 AWM · Silicone rubber · -60°C to +150°C · 600V
- UL 3068 — UL 758 AWM · Silicone rubber · -60°C to +150°C · 300V
- FLR2G — ISO 19642-3 · Silicone Rubber (SiR) · -40°C to +200°C · 25/60V
- FL2G — ISO 19642-3 · Silicone Rubber (SiR) · -40°C to +200°C · 25/60V
- FHLR2GCB91X — ISO 19642-9 · Silicone Rubber (SiR) · -40°C to +150°C · 1000/1500V
- FHLR2GCB2G MC — ISO 19642-9 · Silicone Rubber (SiR) · -40°C to +180°C · 1000/1500V
- FHLR2GCB2G — ISO 19642-9 · Silicone Rubber (SiR) · -40°C to +180°C · 1000/1500V
- FHLR2GC91X — ISO 19642-9 · Silicone Rubber (SiR) · -40°C to +150°C · 1000/1500V
- FHLR2GC2G — ISO 19642-9 · Silicone Rubber (SiR) · -40°C to +180°C · 1000/1500V
- FHLR2G2G MC — ISO 19642-9 · Silicone Rubber (SiR) · -40°C to +180°C · 1000/1500V
- FHLR2G — ISO 19642-5 · Silicone Rubber (SiR) · -40°C to +180°C · 1000/1500V
- FHL2G — ISO 19642-5 · Silicone Rubber (SiR) · -40°C to +200°C · 1000/1500V
Applications & Standards Using This Material
Frequently Asked Questions
- Why choose silicone rubber insulation?
- Silicone stays flexible from −60°C to +200°C while resisting thermal ageing and ozone, making it ideal for cables routed through hot, tight or continuously flexing installations.
- When is a fiberglass braid added over silicone insulation?
- Silicone rubber is soft compared with hard thermoplastics; adding a silicone-varnished fiberglass overbraid greatly increases abrasion, cut-through and hot-surface protection in motors, ovens and appliances.
- Is silicone rubber used in EV high-voltage cables?
- Yes — flexible silicone-insulated constructions are widely used in EV powertrain, battery and inverter harnesses combining elevated thermal loads with tight bend radii.
Engineering Guides
- PFAS-Free High-Temperature Wire & Cable Alternatives: Navigating ECHA's November 2026 Opinions, EPA TSCA 8(a)(7), and Fluoropolymer Substitution — Following ECHA's November 2026 final PFAS opinions and US EPA TSCA 8(a)(7) updates, learn how to audit PTFE, FEP, PFA, and ETFE wire BOMs and evaluate PFAS-free PEEK, Silicone, Polyimide, XLPO, and Mica alternatives.
- Fluoropolymer vs. Silicone Insulation Guide: PTFE, FEP, PFA, ETFE, PVDF & SiR Tradeoffs — How to choose between extruded/wrapped PTFE, melt-processable FEP and PFA, mechanically tough ETFE and PVDF, and ultra-flexible Silicone Rubber across chemical immersion, bend radius, cut-through, max O.D., HV corona, and 2026 PFAS strategy.
- Why FEP & PTFE Insulated Cores Cannot Use Cross-Linked Jackets: E-Beam, Peroxide, Silane, and Silicone Compatibility Guide — Real failure-analysis photos and polymer-physics guide explaining why cross-linked PUR, rubber, and XLPE jackets cause brittle cracking and fracture in FEP/PTFE primary cores — plus safe hybrid alternatives.