PP — Polypropylene Insulation

Ultra-lightweight, halogen-free polyolefin with low dielectric constant — engineered for thin-wall weight-saving automotive harnesses and low-capacitance industrial control cores.

What is PP insulation?

Polypropylene (PP) is a semi-crystalline, halogen-free polyolefin offering one of the lowest densities (~0.90 g/cm³) and lowest dielectric constants among extrusion polymers. In automotive and EV harness engineering, moving thin-wall primary wires from PVC to PP (such as ISO 19642 FL9Y, FLR9Y and FHL9Y) cuts insulation weight substantially while achieving +105°C to +125°C thermal endurance without cross-linking.

In industrial automation and sensor multicore cables, PP's low permittivity and high insulation resistance make it an ideal core dielectric beneath rugged PUR outer jackets, keeping mutual capacitance low over extended signal runs.

Because polypropylene combines high tensile stiffness with low dielectric permittivity (εr ~2.2) and zero halogens or PFAS, thin-wall PP cores hold concentricity cleanly during high-speed extrusion and withstand crush forces inside densely packed multicore cables. In dynamic automation and sensor cables, pairing PP core insulation with a halogen-free PUR outer sheath reduces cable diameter and mutual capacitance simultaneously while extending drag-chain flex life.

Two formulation boundaries merit attention: standard homopolymer PP stiffens in sub-zero cold, so automotive and mobile cables use modified impact-copolymer PP grades rated down to −40°C; and because base polyolefin burns readily, standalone automotive PP wires require flame-retardant compounding while industrial multicore cables rely on flame-retardant outer jackets tested to IEC 60332-1-2 or UL 758.

Key Material Properties

PropertyRatingNotes
Density~0.90 g/cm³Substantially lighter than PVC or fluoropolymers
Temperature105°C–125°C (automotive grades)Halogen-free thermoplastic
DielectricLow permittivity (~2.2)Low mutual capacitance in signal cores
Typical usesISO 19642 automotive wire, PUR multicore cablesWeight-saving harnesses & sensor cores
Compliance & ToughnessHalogen-free · 100% PFAS-free · High stiffnessImpact-modified grades for −40°C cold flex
Flame considerationsRequires FR compounding or FR outer sheathVerified at wire/cable level (ISO 6722-1 / IEC 60332)

PP Insulated Products

  • FLR9Y — ISO 19642-3 · PP · 125°C · 25/60V
  • FL9Y — ISO 19642-3 · PP · 125°C · 25/60V
  • FHLR9Y — ISO 19642-5 · PP · 125°C · 600/900V
  • FHL9Y — ISO 19642-5 · PP (Polypropylene) · -40°C to +125°C · 1000/1500V

Applications & Standards Using This Material

Frequently Asked Questions

Why are automakers adopting PP-insulated wires instead of PVC?
PP is halogen-free, has ~35% lower density than PVC and supports ultra-thin-wall extrusion, reducing harness mass while retaining +105°C–125°C thermal headroom.
Why pair PP core insulation with a PUR outer jacket?
PP provides crisp electrical isolation and low signal capacitance, while the outer PUR sheath protects the bundle from cutting oils, abrasion and continuous flexing.
How does PP compare to XLPE for 105°C–125°C automotive and industrial wiring?
Modified thermoplastic PP achieves 105°C–125°C automotive ratings (such as ISO 19642 FLR9Y) with lower density and no cross-linking step, reducing cost and weight while supporting easy recycling. Cross-linked XLPE (such as FLR2X or TXL) outperforms PP under direct hot-surface contact, overload deformation and higher 150°C thermal tiers.
Is polypropylene cable insulation inherently flame-retardant?
No — unmodified PP is a combustible polyolefin. Cable-grade PP insulations incorporate halogen-free flame-retardant packages (or operate inside flame-retardant PUR/LSZH outer jackets) to pass automotive ISO 6722-1, IEC 60332-1-2 or UL 758 flame tests.