Rubber — Thermoset Rubber Insulation & Jacketing
Rugged thermoset elastomer compounds — including CPE, EPR and synthetic rubbers — delivering oil, abrasion, impact and flex endurance for portable service cords and heavy industrial cables.
What is Rubber insulation?
Thermoset rubber insulation and jacketing encompasses cross-linked natural and synthetic elastomers — including chlorinated polyethylene (CPE), ethylene propylene rubber (EPR) and polychloroprene compounds — formulated for severe mechanical toughness and continuous flexing. Rubber-jacketed cables withstand dragging across concrete, crushing, cutting oils and outdoor weather, making them the benchmark for hard-service portable cords and heavy industrial machinery feeds.
Within heavy-duty rubber cords, insulation and jacketing layers serve distinct chemical roles: EPR or EPDM cores deliver moisture stability and high dielectric strength (rated 60°C in standard EN 50525-2-21 H07RN-F or 90°C in UL 62 SOOW/SJOOW and EN H07BN4-F), while chlorinated polyethylene (CPE) or polychloroprene (CR) outer jackets provide cutting-oil resistance, sub-zero flex (−25°C to −40°C), ozone stability and flame retardance. CASMO's UL 62 flexible cord line (including SOOW and SJOOW) is UL and cUL Listed under File E546631.
Note on halogen content: because CPE and polychloroprene achieve oil and flame resistance through chlorinated chemistry, standard oil-resistant rubber jackets are not halogen-free. Where a project demands zero-halogen fire performance alongside portable toughness, specify cross-linked LSZH elastomer cords (such as H07ZZ-F under EN 50525-3-21) or halogen-free PUR/TPE constructions instead.
Key Material Properties
| Property | Rating | Notes |
|---|---|---|
| Type | Thermoset elastomer | CPE, EPR & synthetic rubber compounds |
| Flexibility | Excellent | High flex life and cold pliability |
| Ruggedness | Abrasion, crush & oil resistant | Hard-service industrial duty |
| Typical uses | Service cords, portable power cables | SOOW / SJOOW & H07RN-F families |
| Temperature & Cold | 60°C (H07RN-F) · 90°C (SOOW/H07BN4-F) | Flexes down to −25°C / −40°C (compound dependent) |
| CASMO UL 62 Listing | UL / cUL File E546631 (SOOW / SJOOW) | CPE/CR jackets contain chlorine; use LSZH for zero-halogen |
Rubber Insulated Products
Applications & Standards Using This Material
Frequently Asked Questions
- Where are thermoset rubber jackets typically used?
- In hard-service and junior-service flexible cords (such as SOOW, SJOOW and H07RN-F) and portable industrial power cables requiring high flex life, oil resistance and physical toughness.
- Why choose thermoset rubber over PVC?
- Thermoset rubber resists hot surfaces, oil swelling, sub-zero cracking and harsh outdoor abuse far better than PVC, whereas PVC is lighter and lower-cost for indoor moderate-duty applications.
- Are oil-resistant rubber cords like SOOW or H07RN-F halogen-free?
- No. Standard oil- and flame-resistant CPE (used on UL 62 SOOW/SJOOW) and polychloroprene/CR (used on H07RN-F) outer jackets contain chlorine to resist mineral oils and flame spread. If zero-halogen compliance (IEC 60754) is required, specify cross-linked LSZH cords such as H07ZZ-F or halogen-free PUR/TPE cables.
- How do North American SOOW and European H07RN-F rubber cords compare?
- Both are rugged thermoset portable power cords for industrial and outdoor duty, but SOOW is UL 62 / CSA C22.2 No. 49 Listed (CASMO File E546631) at 600V / 90°C in AWG sizes, whereas H07RN-F is harmonised under EN 50525-2-21 at 450/750V / 60°C mobile (or 90°C in H07BN4-F) in metric mm² sizes.
Engineering Guides
- Why FEP & PTFE Insulated Cores Cannot Use Cross-Linked Jackets: E-Beam, Peroxide, Silane, and Silicone Compatibility Guide — Real failure-analysis photos and polymer-physics guide explaining why cross-linked PUR, rubber, and XLPE jackets cause brittle cracking and fracture in FEP/PTFE primary cores — plus safe hybrid alternatives.