SAE J1128 / J1127 — North American Automotive Primary & Battery Wire
Paired road-vehicle standards covering primary harness gauges (SAE J1128: GPT, TWP, HDT, TXL, GXL, SXL, HTS) and heavy-gauge battery/starter cables (SAE J1127: SGT, SGR, SGX, STT, STR, STX).
Standard · SAE International
What are SAE J1128 and SAE J1127?
SAE J1128 and SAE J1127 form the paired North American specifications for road-vehicle low-voltage wiring rated up to 60V DC / 25V AC. SAE J1128 governs primary signal and harness gauges (typically 22 AWG to 8 AWG), spanning thermoplastic PVC grades (general-purpose GPT, thin-wall TWP, heavy-duty HDT), 125°C cross-linked polyolefin grades (ultra-thin TXL, thin-wall GXL, heavy-wall SXL) and silicone HTS.
SAE J1127 extends the same insulation and thermal taxonomy to heavy battery, starter and ground feeders (6 AWG to 4/0 AWG): PVC (SGT, STT), synthetic rubber (SGR, STR) and 125°C cross-linked polyolefin (SGX, STX). Specifying both standards together keeps fluid resistance and thermal performance consistent from sensor leads to main starter cables.
Key Technical Requirements
| Parameter | Requirement | Notes |
|---|---|---|
| Primary types (J1128) | GPT, TWP, HDT, TXL, GXL, SXL, HTS | 22 AWG–8 AWG harness & signal circuits |
| Battery types (J1127) | SGT, SGR, SGX, STT, STR, STX | 6 AWG–4/0 AWG starter & ground feeders |
| Temperature class | 85°C (PVC) · 125°C (XLPE) · 200°C (SiR) | Dry & automotive fluid-immersion qualified |
| Voltage rating | 60V DC / 25V AC nominal | Low-voltage automotive electrical systems |
SAE J1128 / J1127 Products
- TXL — SAE J1128 · Cross-Linked Polyolefin · 125°C · 25/60V
- TWP — SAE J1128 · PVC · 80°C · 25/60V
- SXL — SAE J1128 · Cross-Linked Polyolefin · 125°C · 25/60V
- STX — SAE J1127 · Cross-Linked Polyolefin · 125°C · 25/60V
- STT — SAE J1127 · PVC · 80°C · 25/60V
- STR — SAE J1127 · Synthetic Rubber · 80°C · 25/60V
- SGX — SAE J1127 · Cross-Linked Polyolefin · 125°C · 25/60V
- SGT — SAE J1127 · PVC · 80°C · 25/60V
- SGR — SAE J1127 · Synthetic Rubber · 80°C · 25/60V
- HTS — SAE J1128 · Synthetic Rubber · 80°C · 25/60V
- HDT — SAE J1128 · PVC · 80°C · 25/60V
- GXL — SAE J1128 · Cross-Linked Polyolefin · 125°C · 25/60V
- GPT — SAE J1128 · PVC · 80°C · 25/60V
Insulation Materials in This Standard
Frequently Asked Questions
- What is the difference between SAE J1128 and SAE J1127?
- SAE J1128 covers primary harness wire gauges (typically 22–8 AWG), whereas SAE J1127 covers larger battery, starter and ground cables (6 AWG to 4/0 AWG) using matching insulation codes.
- How do TXL, GXL and SXL differ?
- All three use 125°C cross-linked polyolefin insulation, stepping up in wall thickness from ultra-thin-wall TXL to thin-wall GXL to heavy-wall SXL for higher abrasion zones.
- How do SGT, SGR and SGX battery cables differ?
- SGT uses 80°C–105°C thermoplastic PVC, SGR uses flexible synthetic rubber, and SGX uses 125°C cross-linked polyolefin for hotter engine-bay starter routing.