PFA — Perfluoroalkoxy Fluoropolymer Insulation

Melt-extrudable fluoropolymer rated up to 250°C–260°C continuous — combining PTFE-class thermal and chemical inertness with void-free walls and long continuous extruded lengths.

What is PFA insulation?

Perfluoroalkoxy (PFA) is a fully fluorinated, melt-processable polymer that matches the +250°C to +260°C continuous thermal ceiling and near-universal chemical inertness of PTFE while enabling continuous thermoplastic melt extrusion. That yields void-free insulation walls, uniform concentricity and long continuous reel lengths without the batch limits of paste-extruded PTFE.

PFA is specified across high-temperature UL AWM hook-up styles (such as UL 1709, UL 1710, UL 1858 and UL 1859), exhaust-zone automotive sensor wires (such as FLR51Y) and corrosive-environment thermocouple cables where silicone and FEP reach their thermal limits.

With a melting point near 305°C–310°C and PTFE-equivalent dielectric permittivity (εr 2.0–2.1) plus inherent UL 94 V-0 / VW-1 flame retardance, PFA solves two physical constraints of conventional fluoropolymers: it delivers roughly 50°C–60°C higher continuous headroom and stronger hot stress-crack resistance than FEP, while overcoming paste-extruded PTFE's ~6.5 mm finished O.D. boundary so heavy-gauge leads and multi-core chemical cables can be melt-jacketed in long continuous lengths.

For continuous +250°C to +260°C operation, pair PFA with 2% nickel-plated copper (ASTM B355 Class 2) — or silver-plated copper (ASTM B298) at 200°C (and select UL 250°C styles where conductivity and solderability govern). Like PTFE and FEP, PFA is a fully fluorinated polymer that degrades under high-dose electron-beam irradiation, so multi-core builds should use melt-extruded thermoplastic jackets rather than irradiated cross-linked sheaths.

Key Material Properties

PropertyRatingNotes
Max temperature250°C–260°C continuousMatches PTFE thermal class
ProcessabilityMelt-extrudableLong continuous lengths & uniform wall
Chemical resistanceNear-universal inertnessFuels, acids, bases & solvents
Typical usesHigh-temp UL AWM, automotive & process sensors250°C–260°C chemical & heat duty
Dielectric & Meltεr ~2.0–2.1 · Melt ~305°C–310°CInherent UL 94 V-0 / VW-1; surpasses PTFE 6.5 mm O.D. cap
Conductor pairing2% NPC (250°C–260°C) · SPC (200°C; select UL 250°C)Avoid tinned copper above 150°C–180°C

PFA Insulated Products

  • UL 1859 — UL 758 AWM · PFA · -60°C to +150°C · 600V
  • UL 1858 — UL 758 AWM · PFA · -60°C to +150°C · 300V
  • UL 1710 — UL 758 AWM · PFA · -60°C to +200°C · 600V
  • UL 1709 — UL 758 AWM · PFA · -60°C to +200°C · 300V
  • FLR51Y — ISO 19642-3 · PFA · -40°C to +260°C · 25/60V

Applications & Standards Using This Material

Frequently Asked Questions

How does PFA compare to FEP and PTFE?
PFA handles roughly 50°C higher continuous temperature than FEP (250°C–260°C vs. 200°C) and matches PTFE's thermal and chemical inertness while remaining melt-extrudable for smoother, longer continuous runs.
Where is PFA insulation typically specified?
In 250°C UL AWM equipment wiring, high-heat automotive sensor harnesses, semiconductor wet-bench equipment and chemically aggressive thermocouple loops.
When is PFA worth its higher resin cost compared with PTFE or FEP?
Choose PFA over FEP when continuous temperatures exceed +200°C (up to +250°C–+260°C) or hot flex-fatigue/stress cracking is critical. Choose PFA over extruded PTFE when you need long continuous void-free lengths, thick multi-core outer jacketing or finished diameters beyond paste-extruded PTFE's ~6.5 mm ceiling.
What conductor plating pairs best with 250°C–260°C PFA insulation?
2% nickel-plated copper (ASTM B355 Class 2) is the industrial standard for continuous 250°C–260°C PFA leads, while silver-plated copper (ASTM B298) is preferred up to 200°C (and select UL 250°C styles) where maximum conductivity, low RF skin loss and clean solderability are required.

Engineering Guides