JASO D611 — Japanese Automotive Low-Voltage Primary Wire

Governs thin-wall, ultra-thin-wall and cross-linked automotive primary wires — including AV, AVS, AVSS, AEX and compressed-conductor variants — across Japanese and global OEM harnesses.

Standard · Japanese Automobile Standards Organization (JASO)

What is JASO D611?

JASO D611 (tested to JASO D618) is the Japanese Automobile Standards Organization specification for low-voltage automotive primary wires. It establishes standardised conductor cross-sections, insulation wall classes, outer diameters and thermal grades — progressing from standard-wall AV to thin-wall AVS and ultra-thin-wall AVSS PVC wires, alongside cross-linked AEX and compressed-strand CAVS/CAVUS types for compact harnesses.

Because Japanese OEM platforms and Tier-1 harness suppliers operate worldwide, JASO D611 wires are specified globally wherever lightweight bundle diameter, terminal-crimp compatibility and consistent abrasion and fluid resistance are required across cabin, door and engine-bay zones.

Key Technical Requirements

ParameterRequirementNotes
Primary wire familiesAV · AVS · AVSS · AEX · CAVSStandard, thin-wall, ultra-thin & cross-linked
Insulation systemsPVC · Cross-linked XLPE (AEX/AVX)Matched to thermal and abrasion zone
Temperature range80°C to 150°CWire-type dependent
Test referenceJASO D618Flame, fluid, scrape abrasion & thermal ageing

JASO D611 Products

  • HDEB — JASO D611 · PVC · 80°C · 25/60V
  • EB — JASO D611 · PVC · 80°C · 25/60V
  • CAVS — JASO D611 · PVC · 80°C · 25/60V
  • AVSSH — JASO D611 · PVC · 100°C · 25/60V
  • AVSS — JASO D611 · PVC · 80°C · 25/60V
  • AVS — JASO D611 · PVC · 80°C · 25/60V
  • AV — JASO D611 · PVC · 80°C · 25/60V
  • AEX — JASO D611 · XLPE · 120°C · 25/60V
  • AESSX — JASO D611 · XLPE · 120°C · 25/60V

Insulation Materials in This Standard

Frequently Asked Questions

What is the difference between AV, AVS and AVSS?
They share nominal conductor sizing but step down in insulation wall thickness — from standard AV to thin-wall AVS to ultra-thin-wall AVSS — cutting harness weight and bundle diameter.
What is JASO AEX wire?
AEX uses cross-linked polyethylene (XLPE) insulation instead of PVC, delivering higher continuous temperature endurance (typically 125°C) and superior hot-zone abrasion resistance.
How does JASO D611 compare to SAE J1128 and ISO 19642?
All three govern automotive primary wiring, but they specify distinct conductor gauges, wall thicknesses and outer diameter tolerances and cannot be substituted directly without connector and crimp verification.
Which JASO D611 wire types does CASMO supply?
CASMO manufactures a broad range of JASO D611 primary wires — including AV, AVS, AVSS, AEX and flexible or compressed-conductor variants — for global automotive harness programmes.