Mica — Mica Tape Fire-Survival Insulation
Inorganic mineral barrier tape engineered for extreme-heat and circuit-integrity cables — preserving electrical isolation from 450°C to 600°C+ and during direct fire exposure.
What is Mica insulation?
Phlogopite or muscovite mica is a naturally fireproof mineral applied as overlapping helical tape layers directly over the conductor beneath secondary insulation or woven fiberglass braids. Its defining role is thermal and flame barrier integrity: even if outer polymers burn away in a fire or extreme furnace zone, the inorganic mica wrap stays intact to prevent conductor-to-conductor short circuits.
Mica-insulated constructions serve two critical domains: fire-survival building and infrastructure cables that keep emergency alarms, pumps and control loops energised during a fire, and extreme-temperature appliance, heater and thermocouple wires operating continuously at 450°C to 600°C (typically paired with nickel-coated copper or pure nickel conductors and fiberglass braids).
Because mica is an inorganic mineral layer rather than a melt-extruded plastic, it is chosen specifically when fire-survival or 450°C+ continuous thermal endurance is mandatory.
Key Material Properties
| Property | Rating | Notes |
|---|---|---|
| Temperature / Fire | 450°C–600°C+ (circuit integrity) | Inorganic mineral fire barrier |
| Type | Helically wrapped mineral tape | Paired with fiberglass braid or polymer jacket |
| Purpose | Fire-survival & extreme-heat wiring | Maintains isolation when polymers char |
| Typical uses | High-temp MGT wires, fire-survival feeders, sensors | Safety- & heat-critical circuits |
Mica Insulated Products
Applications & Standards Using This Material
Frequently Asked Questions
- What does mica tape insulation do in a cable?
- Mica forms an inorganic, non-combustible dielectric barrier around the conductor so safety-critical circuits maintain electrical isolation during a fire or under 450°C–600°C continuous heat.
- Why is mica usually combined with fiberglass braids or polymer jackets?
- Mica tape provides thermal and flame survival, while an outer fiberglass braid or extruded sheath adds mechanical abrasion resistance, moisture sealing and clean handling during installation.
Engineering Guides
- PFAS-Free High-Temperature Wire & Cable Alternatives: Navigating ECHA's November 2026 Opinions, EPA TSCA 8(a)(7), and Fluoropolymer Substitution — Following ECHA's November 2026 final PFAS opinions and US EPA TSCA 8(a)(7) updates, learn how to audit PTFE, FEP, PFA, and ETFE wire BOMs and evaluate PFAS-free PEEK, Silicone, Polyimide, XLPO, and Mica alternatives.
- High-Temperature Conductor Selection (150°C to 1000°C+): Tin, Silver, 2% Nickel, 27% Nickel-Coated & Pure Nickel — Why copper oxidizes and forms brittle intermetallics at elevated temperatures — and how to match ASTM B33, B298, B355 (Class 2 & 27), and B160 conductor metallurgies to operating temperature, DCR voltage drop, and permanent termination methods.