EN 50264 — Railway Rolling-Stock Power & Control Cables

Defines halogen-free, electron-beam cross-linked rolling-stock cables engineered for traction converters, bogie power and EN 45545-2 fire-safety compliance in rail transit vehicles.

Standard · CENELEC (European Committee for Electrotechnical Standardization)

What is EN 50264?

EN 50264 establishes dimensional, electrical, thermal and fire-safety requirements for halogen-free, cross-linked power and control cables installed on railway rolling stock — including locomotives, metro cars, high-speed trains and trams. Constructions span 300/500V, 600/1000V and 1.8/3 kV DC/AC voltage classes while withstanding continuous vibration, ozone, mineral oils and fuels.

Paired with EN 45545-2 railway fire-protection hazard levels, EN 50264 cables strictly limit flame propagation, heat release, smoke opacity and toxic acid-gas evolution inside passenger vehicles and tunnels.

The standard is structured into Part 1 (general requirements), Parts 2-1 and 2-2 (standard-wall single-core cables up to 3.6/6 kV and 0.6/1 kV multi-core cables), and Parts 3-1 and 3-2 (reduced-dimension thin-wall single-core cables from 0.6/1 kV to 3.6/6 kV and compact 300/500V or 0.6/1 kV multi-core cables). All constructions specify EN 60228 Class 5 flexible tinned-copper conductors paired with halogen-free cross-linked elastomeric compounds — such as EI 109 insulation and EM 104 jacketing for extra-low-temperature, oil- and diesel-fuel endurance.

Standard EN 50264 thermal design is anchored at 90°C continuous conductor operation and 200°C short-circuit withstand (5 s), while enhanced electron-beam cross-linked XLPO rolling-stock builds extend operating capability to a 120°C thermal-endurance index (20,000 h) and down to −40°C or −50°C in cold-climate bogie and underframe zones.

Key Technical Requirements

ParameterRequirementNotes
Voltage classes300/500V · 600/1000V · 1.8/3 kVSingle-core & multi-core rolling-stock feeders
InsulationHalogen-free cross-linked polymerDual-layer e-beam cross-linked (EI 109 / EM 104)
Fire safetyEN 45545-2 · EN 60332 · IEC 61034Low smoke, zero halogen & low toxicity
Temperature−40°C to +90°C / +120°CShort-circuit & thermal endurance qualified
Standard partsPart 1 · 2-1/2-2 (Std) · 3-1/3-2 (Reduced)Reduced-wall Part 3 cuts weight & bend space
Conductors & SCEN 60228 Class 5 tinned Cu · 200°C SC (5 s)Vibration- & corrosion-resistant fine stranding

EN 50264 Products

  • 4GKW-AX PLUS FLEX — EN 50264-3-1 / EN 45545-2 · Halogen-Free XLPO · -40°C to +120°C · 1800/3000V

Insulation Materials in This Standard

Frequently Asked Questions

Why does railway rolling stock require EN 50264 instead of standard industrial cable?
Passenger rail imposes strict EN 45545-2 smoke, toxicity and flame-spread limits alongside continuous mechanical vibration, fluid resistance and elevated traction voltages up to 1.8/3 kV.
Which CASMO constructions align with EN 50264?
CASMO's 1.8/3 kV rolling-stock cables (such as 4GKW-AX Plus Flex) are engineered to EN 50264-3-1 and EN 45545-2 requirements.
What is the difference between EN 50264-2 and EN 50264-3 cables?
EN 50264-2 covers standard-wall rolling-stock cables, whereas EN 50264-3 (Parts 3-1 single-core and 3-2 multi-core) specifies reduced-dimension, thin-wall cross-linked constructions that lower harness weight and outer diameter inside cramped metro, tram and high-speed rail ducts.
How do EN 50264 cables relate to EN 45545-2 Hazard Levels (HL1, HL2, HL3)?
EN 50264 defines cable construction, electrical and mechanical requirements, while EN 45545-2 establishes railway vehicle fire-safety Hazard Levels (HL1 lowest risk through HL3 highest risk, such as underground sleepers and tunnels) verified via vertical flame spread (EN 60332-3-24/25), smoke density (EN 61034-2) and gas toxicity (EN 50305). Confirm the required HL class on your project specification.

Engineering Guides