EPDM — Ethylene Propylene Diene Monomer Rubber

Cross-linked thermoset rubber combining weather, ozone, moisture and heat-ageing resistance — widely used in portable power cords, motor leads and rugged outdoor service cables.

What is EPDM insulation?

Ethylene propylene diene monomer (EPDM) is a synthetic thermoset rubber prized for long-term resistance to outdoor weathering, ozone, UV, moisture and thermal ageing. Cross-linked during curing, EPDM retains elastic recovery and dielectric strength across wide temperature ranges without softening or flowing under load.

EPDM is commonly used as primary conductor insulation inside UL 62 hard-service and junior-service portable cords (such as SOOW and SJOOW), flexible motor leads and outdoor industrial cables that experience continuous flexing, dragging and environmental exposure.

Because EPDM is a saturated hydrocarbon elastomer, it offers exceptional resistance to ozone cracking, UV sunlight, steam, hot water, dilute acids/alkalis and high-voltage corona discharge across −40°C to +90°C/+105°C in UL 62 portable cords (and up to +125°C–+150°C in dedicated motor-lead compounds), while remaining 100% PFAS-free.

Its primary chemical boundary is hydrocarbon oil exposure: unmodified EPDM swells in prolonged petroleum oil and aromatic fuel immersion. That is why UL 62 SOOW and SJOOW cords pair oil-resistant-compounded EPDM primary core insulation (for wet dielectric stability and flex life) beneath a heavy-duty chlorinated polyethylene (CPE) outer jacket that bears direct contact with cutting oils, grease, flames and abrasion.

Key Material Properties

PropertyRatingNotes
TypeThermoset synthetic rubberCross-linked elastomer
Weather & ozoneExcellentUV, moisture & ageing resistant
FlexibilityHigh across temperature rangeRepeated flexing and coiling
Typical usesFlexible cords, motor leads, outdoor cableIndustrial & outdoor service
Temperature range−40°C to +90°C/+105°C (cords) · ≤150°C (leads)100% PFAS-free; strong corona & steam stability
Oil compatibilityUnmodified EPDM swells in petroleum oilsOil-resistant-compounded cores + CPE outer jacket in SOOW

EPDM Insulated Products

  • SOOW — UL 62 · EPDM · -40°C to +90°C · 600V
  • SJOOW — UL 62 · EPDM · -40°C to +90°C · 300V

Applications & Standards Using This Material

Frequently Asked Questions

Why is EPDM widely used in portable power cords?
EPDM stays flexible across wide temperatures while resisting moisture, ozone, UV and heat ageing, making it a reliable core insulation for rugged cords like SOOW and SJOOW.
Is EPDM a thermoset rubber or a thermoplastic?
EPDM is a cross-linked thermoset rubber, so it holds its elasticity and shape under elevated temperatures rather than melting or flowing like a thermoplastic.
Why do UL 62 SOOW cords use EPDM core insulation with a CPE outer jacket instead of EPDM for both layers?
EPDM delivers superior dielectric stability, moisture resistance and heat-ageing elasticity inside the core, while unmodified EPDM swells under prolonged petroleum oil immersion. Pairing oil-resistant-compounded EPDM cores with a heavy-duty thermoset CPE outer jacket delivers full OO oil endurance alongside superior flame, tear and abrasion protection.
How does EPDM compare to Silicone Rubber for flexible high-temperature leads?
EPDM provides higher mechanical tear and cut-through toughness at lower cost for continuous temperatures up to 90°C–125°C (and select 150°C motor leads), whereas Silicone Rubber stays far softer in extreme cold and extends continuous operation to 180°C–200°C.