PUR — Thermoplastic Polyurethane Cable Jacketing
Tough industrial elastomer jacketing engineered for severe abrasion, cutting oils, coolants, outdoor weathering and continuous flexing in automation, drag-chain and machinery cables.
What is PUR cable jacketing?
Thermoplastic polyurethane (PUR / TPU) is a high-performance elastomer specified primarily as an outer protective sheath on industrial control, fieldbus, sensor, actuator and drag-chain cables. Where standard PVC jackets stiffen in sub-zero cold, swell in cutting oils or wear through against machine frames, PUR stays elastic while delivering superior tear, notch and abrasion resistance.
Specifying PUR effectively requires distinguishing between polyether-based and polyester-based formulations. Polyether PUR provides superior resistance to hydrolysis, water-based CNC coolants, humidity and microbial attack — making it the standard choice for wet industrial automation and outdoor drag chains — whereas polyester PUR maximises tear strength and mineral-oil endurance in dry mechanical environments.
For multi-million-cycle energy-chain service, a low-adhesion extruded PUR jacket is paired with ultra-fine stranded copper conductors, low-capacitance PP or cellular PE core insulations and a non-woven glide fleece so individual cores move smoothly without corkscrewing. Halogen-free, PFAS-free and UL 758 / IEC 60332-1-2 flame-retardant PUR jackets cover −40°C to +80°C/+90°C standard industrial envelopes (with specialty grades extending higher).
Key Material Properties
| Property | Rating | Notes |
|---|---|---|
| Mechanical | Extreme abrasion & tear strength | Outperforms PVC in dynamic wear |
| Fluids | Oil, coolant & hydrolysis resistant | Machine-tool & factory environments |
| Flexibility | Low-temperature & drag-chain endurance | Continuous flexing in tight bends |
| Typical role | Outer protective jacket | Control, fieldbus & sensor cables |
| Temperature & PFAS | −40°C to +80°C/+90°C · 100% PFAS-free | Halogen-free & flame-retardant UL/IEC grades |
| Chemistry choice | Polyether (hydrolysis/coolant) · Polyester (oil) | Select polyether PUR for wet CNC & outdoor runs |
PUR Insulated Products
- LIY11Y — DIN VDE 0812 / DIN 47100 · PVC · -40°C to +80°C · 500V
Applications & Standards Using This Material
Frequently Asked Questions
- When should I choose a PUR jacket over PVC?
- Choose PUR whenever a cable faces cutting oils, lubricants, severe mechanical abrasion, moving drag chains or cold temperatures where standard PVC cracks or swells.
- Is PUR used as core insulation or outer jacketing?
- Predominantly as a protective outer sheath over PP, PE, XLPE or PVC insulated cores so the cable pairs crisp electrical performance with maximum external toughness.
- What is the difference between polyether PUR and polyester PUR cable jackets?
- Polyether PUR resists water hydrolysis, water-miscible CNC cutting coolants, moisture and microbial growth far better than polyester PUR, making it the default for wet machine tools and outdoor automation. Polyester PUR offers slightly higher tensile tear strength and mineral-oil resistance in dry indoor factories.
- Are PUR cable jackets halogen-free and flame-retardant?
- Base polyurethane is inherently halogen-free and 100% PFAS-free, but standard uncompounded PUR is not automatically flame-retardant. Specify flame-retardant halogen-free PUR formulations verified to UL VW-1 / FT2 or IEC 60332-1-2 whenever panel, factory-tray or UL AWM flame compliance is required.
Engineering Guides
- J1939 Cable Impedance: Why 120Ω Is Non-Negotiable in CAN Bus & CAN FD Design — How dielectric permittivity, insulation wall concentricity, pair lay length, and shield capacitance govern 120Ω ± 10% characteristic impedance across heavy-duty SAE J1939-11, J1939-14 (500 kbps), and CAN FD vehicle backbones.
- SAE J1939/11 vs. J1939-15 & J1939-14: Shielded vs. Unshielded CAN Bus Physical-Layer Guide — Complete physical-layer engineering guide comparing shielded SAE J1939/11, unshielded SAE J1939-15, and 500 kbps J1939-14 cables — covering 3-conductor anatomy, drain grounding discipline, topology budgets, EV inverter EMI, and circular jacket sealing.
- Change Order Survival: Amending a Released J1939 CAN Bus Cable Spec Mid-Program — A practical engineering checklist for modifying J1939 CAN cable jacket chemistry, outer diameter, temperature class, or hybrid power+CAN cores mid-program without breaking connector tooling, IP69K seals, or 120Ω signal integrity.
- Why FEP & PTFE Insulated Cores Cannot Use Cross-Linked Jackets: E-Beam, Peroxide, Silane, and Silicone Compatibility Guide — Real failure-analysis photos and polymer-physics guide explaining why cross-linked PUR, rubber, and XLPE jackets cause brittle cracking and fracture in FEP/PTFE primary cores — plus safe hybrid alternatives.