RoundFlat Cables

Round-jacketed external routing combined with an internal flat ribbon core — simplifying cable glands, conduit pulls and EMI shielding while preserving fast mass IDC termination.

Round external routing with internal flat-ribbon termination

RoundFlat cables bridge the gap between external cabinet routing and internal board-to-board mass termination. A flexible round outer jacket routes cleanly through cable glands, grommets, knockouts and conduits where flat ribbon is difficult to seal or bend across multiple axes, while the internal parallel flat ribbon core strips back cleanly for direct IDC connector termination without hand-sorting individual wires.

Commonly engineered to UL 758 Style 20276 (including 28 AWG stranded tinned copper on a 1.27 mm / 0.050 in pitch), RoundFlat constructions are available in both unshielded designs for clean enclosures and dual aluminium-foil plus tinned-copper braid shielded designs for high-EMI equipment interconnects. Specifying finished round outer diameter separately from internal ribbon pitch and thickness ensures seamless fit across both mechanical seals and IDC headers.

For procurement reference, CASMO RoundFlat Shielded and Unshielded series are built to the standard 1.27 mm pitch round-jacketed flat cable form factor comparable to widely specified industry lines such as 3M™ 3659 and 3759 Series.

3M™ is a trademark of 3M Company; CASMO CABLE LLC is an independent manufacturer not affiliated with or endorsed by 3M. Always confirm outer diameter tolerances, shield coverage, and UL 20276 ratings against CASMO's specification sheet prior to substitution.

RoundFlat Cable Products

Related Standards, Materials & Applications

Frequently Asked Questions

How does RoundFlat cable differ from ordinary round multicore cable?
Unlike helically cabled round multicore wire, RoundFlat houses a structured flat ribbon core inside a round outer jacket. That lets installers route and seal a round cable externally while still mass-terminating the ends directly into IDC connectors.
How should I specify outer diameter versus internal ribbon pitch for glands and connectors?
Match cable glands, strain reliefs and conduit openings to the finished round Overall O.D., and match your IDC connector family to the internal ribbon conductor pitch, AWG size and stripped core count.
When should I choose shielded versus unshielded RoundFlat cable?
Choose dual foil-plus-braid shielded RoundFlat for external cabinet-to-cabinet runs or environments near motors, drives and RF sources; choose unshielded RoundFlat for compact, flexible internal or low-EMI equipment interconnects.
Which industry round-jacketed flat cable series does CASMO RoundFlat cross-reference?
CASMO RoundFlat Shielded and Unshielded series (typically UL 758 Style 20276, 28 AWG, 1.27 mm / 0.050 in pitch) are commonly evaluated as reference-only functional alternatives where drawings cite 3M™ 3659 Series (shielded) or 3759 Series (unshielded). Confirm finished O.D., shield coverage and agency ratings against CASMO's specification sheet before substitution.