Solar & Photovoltaic Cables
UV-stabilised, double-insulated DC photovoltaic cables engineered for 25-year outdoor service in utility-scale, commercial rooftop and energy-storage arrays up to 1500V DC.
Long-term outdoor UV, weather & DC voltage endurance
Photovoltaic DC string cables spend decades exposed to direct ultraviolet radiation, extreme rooftop and desert temperature swings, ozone, rain and continuous high-voltage DC stress. Ordinary AC building wire embrittles and cracks under that combined load. Purpose-built solar cables — governed by standards such as EN 50618 (H1Z2Z2-K), IEC 62930 and legacy PV1-F, alongside North American UL 4703 PV wire — use finely stranded tinned-copper conductors wrapped in halogen-free, electron-beam cross-linked polyolefin (XLPO) double insulation.
Continuous DC dielectric strength and accelerated weathering endurance separate true solar cable from general outdoor wire. Modern utility and commercial arrays operate at 1000V to 1500V DC (with maximum open-circuit margins to 1800V DC), requiring cross-linked insulation that resists thermal deformation, hydrolysis, ammonia and photodegradation while remaining flexible for fast tracker and rooftop installation.
CASMO holds TÜV Rheinland Certificate R 50693675 for EN 50618 H1Z2Z2-K solar photovoltaic cables (1.5 mm² to 35 mm², 1500V DC, −40°C to +90°C ambient / +120°C max conductor), alongside PV1-F and international solar DC options. Beyond solar arrays, CASMO also custom-engineers UV-, cold-flex- and torsion-resistant power, control and sensor cables for wind-turbine nacelles, towers and utility battery energy-storage systems (BESS).
Solar / PV Products
- H1Z2Z2-K — EN 50618 · Halogen-Free XLPO · -40°C to +90°C · 1000/1500V
Related Standards, Materials & Applications
Frequently Asked Questions
- What is the difference between H1Z2Z2-K and PV1-F solar cable?
- PV1-F was the earlier 1000V DC TÜV specification type, while H1Z2Z2-K is the harmonised European EN 50618 designation upgrading continuous DC ratings to 1500V DC with stricter weathering, damp-heat and halogen-free requirements.
- What DC voltage ratings do modern solar photovoltaic cables support?
- Modern photovoltaic cables such as EN 50618 H1Z2Z2-K are rated for 1500V DC nominal (up to 1800V DC max), serving both legacy 1000V DC rooftops and modern 1500V DC utility-scale string inverters.
- Why do solar cables use tinned copper and electron-beam cross-linked XLPO?
- Tinned copper resists corrosion in humid, coastal or outdoor junction boxes, while electron-beam cross-linked halogen-free XLPO resists UV cracking, high ambient heat (+90°C ambient / +120°C conductor) and thermal shrinkage over a 25-year design life.
- Can standard building wire replace photovoltaic DC cable on outdoor arrays?
- No — standard building wire lacks the continuous DC wet-insulation resistance, UV/ozone ageing life, cold-flex performance and double-insulated Class II safety margins required for exposed PV strings.
- Does CASMO supply outdoor cables for wind turbines and battery energy-storage systems (BESS) as well as solar PV arrays?
- Yes — alongside TÜV Rheinland certified EN 50618 H1Z2Z2-K solar PV cables (Cert. R 50693675), CASMO supplies custom-engineered weather-, UV-, oil- and cold-flex-resistant power, control, CAN/RS-485 telemetry and temperature-sensing cables tailored to wind-turbine loop, tower and utility BESS specifications.