NEMA HP — High-Performance Fluoropolymer Equipment Wire
Commercial fluoropolymer hook-up wire series (HP3 through HP7) defining PTFE, FEP and ETFE insulation walls, conductor platings and 150°C to 260°C ratings for demanding electronics and test equipment.
Standard · National Electrical Manufacturers Association (NEMA)
What is NEMA HP?
NEMA HP (High Performance) is the National Electrical Manufacturers Association specification family governing fluoropolymer-insulated equipment hook-up wires — succeeding legacy commercial MIL-W-16878 types. Each HP series defines a primary insulation chemistry: NEMA HP3 covers extruded PTFE, NEMA HP4 covers extruded FEP, and HP5 through HP7 cover composite fluoropolymer, ETFE and polyimide/PTFE systems.
Within each series, lettered wire types set wall thickness and RMS voltage class — such as Type ET (thin-wall 250V), Type E (standard-wall 600V) and Type EE (heavy-wall 1000V) under HP3, or Type KT, K and KK under HP4. Paired with silver-plated copper (to 200°C) or nickel-plated copper (to 260°C), NEMA HP wires resist fuels, solvents and soldering heat in compact diameters. Always verify exact series, type designation and project qualification requirements on the product specification sheet.
Key Technical Requirements
| Parameter | Requirement | Notes |
|---|---|---|
| Series coverage | HP3 (PTFE) · HP4 (FEP) · HP5–HP7 | Organised by fluoropolymer insulation system |
| Voltage & wall types | 250V (ET/KT) · 600V (E/K) · 1000V (EE/KK) | Thin-, standard- and heavy-wall classes |
| Conductors & temp. | SPC (200°C) · NPC (260°C) | Plating determines continuous thermal ceiling |
| Legacy lineage | Succeeds commercial MIL-W-16878 | Verify platform-specific qualification separately |
NEMA HP Products
- NEMA HP 4 TYPE KT — NEMA HP4 · FEP · -65°C to +200°C · 250V
- NEMA HP 4 TYPE KK — NEMA HP4 · FEP · -65°C to +200°C · 1000V
- NEMA HP 4 TYPE K — NEMA HP4 · FEP · -65°C to +200°C · 600V
- NEMA HP 3 TYPE ET — NEMA HP3 · PTFE · -65°C to +200°C · 250V
- NEMA HP 3 TYPE EE — NEMA HP3 · PTFE · -65°C to +200°C · 1000V
- NEMA HP 3 TYPE E — NEMA HP3 · PTFE · -65°C to +200°C · 600V
Insulation Materials in This Standard
Frequently Asked Questions
- What is the difference between NEMA HP3 and NEMA HP4?
- NEMA HP3 specifies extruded PTFE insulation (rated up to 200°C with silver-plated copper or 260°C with nickel-plated copper), whereas NEMA HP4 specifies melt-extruded FEP insulation (rated up to 200°C) for long continuous lengths and smoother flexibility.
- How do Type ET, Type E and Type EE differ under NEMA HP3?
- They share PTFE insulation but step up in wall thickness and voltage rating: Type ET is thin-wall 250V, Type E is standard-wall 600V and Type EE is heavy-wall 1000V for higher dielectric stress and abrasion endurance.
- Does a NEMA HP designation automatically establish military or aircraft approval?
- No. Although NEMA HP specifications are historically linked to MIL-W-16878 equipment wire types, end-use military or aerospace qualification must be established against the specific project and procurement documentation.
Engineering Guides
- Why FEP & PTFE Insulated Cores Cannot Use Cross-Linked Jackets: E-Beam, Peroxide, Silane, and Silicone Compatibility Guide — Real failure-analysis photos and polymer-physics guide explaining why cross-linked PUR, rubber, and XLPE jackets cause brittle cracking and fracture in FEP/PTFE primary cores — plus safe hybrid alternatives.