NEMA HP Hook-Up Wire

High-temperature fluoropolymer hook-up wires specified by NEMA HP series and wall type — combining thin-wall chemical immunity, dielectric stability and 150°C to 260°C thermal performance.

Fluoropolymer performance across NEMA HP series & wall classes

NEMA HP (High Performance) hook-up wires are purpose-built for demanding electronics, instrumentation, test rigs and defence-adjacent equipment where conventional PVC or cross-linked polyolefins soften, outgas or degrade. Organised by insulation chemistry — such as extruded PTFE (NEMA HP3), FEP (NEMA HP4) and composite fluoropolymer/ETFE systems (HP5–HP7) — the family delivers exceptional resistance to fuels, solvents, soldering heat and thermal cycling in compact outer diameters.

Each NEMA HP series subdivides into standardized wall-thickness and voltage types: for example, NEMA HP3 Type ET (thin-wall 250V), Type E (standard-wall 600V) and Type EE (heavy-wall 1000V), with corresponding Type KT, K and KK grades under NEMA HP4. Conductor plating defines the upper thermal ceiling — silver-plated copper typically serves continuous duty up to 200°C, while nickel-plated copper extends PTFE constructions to 260°C.

NEMA HP specifications succeeded legacy MIL-W-16878 commercial equipment-wire types and remain widely referenced across industrial, aerospace and defence assemblies. Because end-platform qualification depends on the specific programme, always verify the exact HP series, type designation, plating and test documentation against the product specification sheet.

NEMA HP Hook-Up Wire Products

Related Standards, Materials & Applications

Frequently Asked Questions

What is the difference between NEMA HP3 Type ET, Type E and Type EE?
All three are PTFE-insulated hook-up wires differing in insulation wall thickness and voltage rating: Type ET is thin-wall rated 250V, Type E is standard-wall rated 600V, and Type EE is heavy-wall rated 1000V for higher electrical stress or mechanical protection.
How do silver-plated and nickel-plated copper conductors affect temperature ratings?
In PTFE constructions such as NEMA HP3, silver-plated copper (SPC) is typically rated to 200°C continuous with excellent solderability and high-frequency conductivity, whereas nickel-plated copper (NPC) extends continuous thermal endurance to 260°C.
How does NEMA HP relate to legacy MIL-W-16878 and military or aerospace approval?
NEMA HP3 and HP4 commercially succeeded legacy MIL-W-16878/4, /5, /6 and /11–/13 types, which is why the family is cross-linked from Military / Aerospace. However, a NEMA HP designation alone does not establish aircraft or military platform qualification — always confirm project-specific compliance requirements.
When should I choose NEMA HP4 (FEP) instead of NEMA HP3 (PTFE)?
Choose NEMA HP4 (FEP) when you need melt-extruded continuous lengths and fluoropolymer chemical resistance up to 200°C; choose NEMA HP3 (PTFE) for higher continuous temperatures (up to 260°C with nickel-plated copper), soldering-iron resistance and superior thermal stability.

Engineering Guides